Hog Technologies STRIPE SH7500, Руководство по эксплуатации

Страница: 61 / 187

61 61
Section 2 - Stripe Hog Systems
Debris Tank Switches
These switches are mounted on the rear of the
debris tank.
DEBRIS PUMP - NORMAL/DISCHARGE
A two position toggle switch that selects the mode
for the transfer pump when it is activated by the
DIRTY WATER switch in the panel. Move the switch
to the NORMAL position to control the pump au-
tomatically with the automatic float switch in the
debris tank sump. Move the switch to the DIS-
CHARGE position to bypass the automatic switch
and manually activate the pump.
LIFT ARM - UP/DOWN
A three position momentary toggle switch that
raises and lowers the optional spare Hog Head.
The center position is OFF. Move the switch to
the UP position to raise the arm. Move the switch
to the DOWN position to lower the arm. Release
the switch to stop the arm in the desired position.
DOOR SEAL
A three position rocker switch that inflates or de -
flates the door seal. The center position is OFF.
Move the switch to the INFLATE position to pres-
surize the seal. Move the switch to the DEFLATE
position to release the pressure in the seal. A
pressure gauge on the chassis below the switch
indicates seal pressure. A pressure sensor and
solenoid valve in the seal pressure line automati-
cally limit maximum seal pressure to 20-25 psi
(1.4 - 1.7 BAR).
Remote Switch Control
The remote switch control harness plugs into
the receptacle on the drivers side tool box. The
control allows the operator to control debris tank
dumping operations a safe distance from the truck.
UP/DOWN switches in the remote control raise or
lower the debris tank for dumping.
Refer to the Operation section of this manual for
additional information on dumping debris.
Typical Debris Tank Switches
Remote Switch Control