Hog Technologies STRIPE SH7500, Руководство по эксплуатации

Страница: 58 / 187

58 58
Section 2 - Stripe Hog Systems
Accessory Circuit Protection
ATC blade type fuses in fuse panels located inside
the control panel and terminal/OTB box protect
most accessory circuits. In-line fuses protect other
circuits.
NOTICE:
THE CIRCUITS PROTECTED BY IN-LINE FUSES WILL VARY.
IN-LINE FUSE LOCATIONS WILL ALSO VARY, DEPENDING
ON THE ACCESSORY CIRCUIT PROTECTED. THE MOST
COMMON LOCATIONS FOR IN-LINE FUSES ARE NEAR THE
MAIN CIRCUIT BREAKERS OR INSIDE THE TERMINAL/OTB
BOX.
The fuses are color coded with the AMP rating
printed on the fuse. The fuse body is translucent
plastic with the fuse element clearly visible mak-
ing it easy to identify a blown fuse.
When replacing fuses, never replace the blown
fuse with a fuse of a different color or higher am -
perage in an attempt to correct a circuit that is
causing the fuse to blow. Using a higher amperage
fuse can cause the circuit to overheat which can
damage the circuit and components or cause an
electrical fire.
Contact Hog Technologies Customer Service if you
need assistance correcting a problem with the
waterblasting electrical system.
Typical In-line Fuse
Terminal/OTB Box Fuse Panel Typical Terminal/OTB Box