Hog Technologies PAINT HOG, Руководство по эксплуатации

Страница: 40 / 87

40 40
Section 2 - Paint Hog Systems
desired position. When the top of the switch is
released, it returns to the center (HOLD) position
and locks the arm. Press and hold the bottom of
the switch to lower the arm. The arm will lower to
the pavement and FLOAT mode will be engaged.
The switch will stay in the LOWER/FLOAT position
until it is moved to HOLD or LIFT. Always make sure
the switch is set to FLOAT whenever operations are
underway or when the arm is stored for transit.
AUXILIARY
Reserved for additional accessories.
AUXILIARY
Reserved for additional accessories.
AUXILIARY
Reserved for additional accessories.
WORK LIGHT
An ON/OFF switch that activates the forward flood
lights on the light bar.
STROBE LIGHTS
An ON/OFF switch that activates the strobe lights
on the light bar as well as side and rear strobes.
AUXILIARY
Reserved for additional accessories.
AUXILIARY
Reserved for additional accessories.
AUXILIARY
Reserved for additional accessories.
CARRIAGE IN/OUT Switches (Optional)
Two momentary, three position switches that move
the right or left carriage in and out.
STEERING LOCK Switches (Optional)
Releases the lock that prevents the right and left
carriages from drifting out when the truck is in
travel mode and activates the carriage steering
system.
Other Cab Switches and Controls
Skip Line Controller
Monitors striping speed and controls line length
and spacing during striping operations. It also
monitors total applied line and skip footage. Refer
to the Skip Line Controller manual for additional
information and operating instructions.
Headset Panel
Skip Line Controller
Cab Headset Panel
The jacks for the cab headphones, volume controls
and fuse protection are located in the headset
panel. There is a separate volume control knob and
jack for each headset. Rotate the knob clockwise
to increase volume, rotate the knob counterclock-
wise to reduce volume. A fuse near the control
dial protects the panel from an overload.