6
General
Operation manual monty 3300/2-speed/GP
monty 3300 2speed 24/ 3300 2speed 24 GP
EAA0332G91A
+4”
EAA0304G32A
Light Truck (17,5”)
EAA0329G53A
Moto (12”-23”)
Optional extras include clamping jaws for +4" rim
diameter, clamping jaws for motorcycle wheels with
a rim diameter of 12" to 23" and clamping jaws for
light-truck wheels with rim diameter 17.5".
Tyres can only be inflated on the machine up to 3.3 bars.
Tyres which require a higher pressure must be inflated
in suitable inflating devices (safety cage and the like).
1.3 General safety rules
Only properly trained and authorized personnel shall
be allowed to operate the tyre changer.
Unauthorized changes and modifications to the
machine relieve HOFMANN from any liability for
damages and injuries that might result therefrom and
cancel the approval given by German authorities.
The machine must not be used except for the scope
of application and in the way specified in this manual.
When fitting tyres on rims, make sure they fit properly
in size (identical nominal diameter); this means for
example no tyres of nominal size in mm on rims of
nominal size in inches and vice versa.
Always observe the applicable national guidelines
when demounting, mounting or inflating tyres.
If troubles occur during operation of the machine,
disconnect the machine from all energy supplies prior
to remedy of the trouble.
In general any work on the electrical system such as
fitting of a plug or changing of connections, if
necessary, must be carried out by a qualified
electrician in line with relevant national standards and
the regulations of the local power station.
In general, it should be noted that working with
technical equipment may involve unforeseen
residual risks
. Therefore, various self-explanatory
warning labels (yellow/black triangle) are fitted on the
tyre changer.
These warning labels warn the operator against
residual risks, calling for his special attention so as
to prevent any injuries, accidents or damage.
In general the operator should eliminate these risks
in advance by proper and wise behaviour.
In this, the following special points should be
observed:
•
Always use suitable and proper equipment and
tools.
•
Wear suitable protective clothing and use suitable
protection (e.g. safety goggles, ear plugs, safety boots
etc.).
•
Strictly follow the instructions, notes and technical
data of the machine manufacturer or manufacturer
of the product to be handled.
