22
4.1-1
F
A
B
C
D
4.1-2
4.1-3
E
D
D
Operator Manual
4.1
Controls
Before operating the machine ensure that you have
well understood the operation and function of all the
controls (Fig. 4.1-1).
A.
•
Press down and release, WITH LEFT FOOT,
the first pedal from the left: the clamps of the
turntable will retract. Do it again: the clamps will
expand. If you press the pedal prior to the end
of the stroke and release, the clamps may be
stopped in any position.
B.
•
Open the bead breaker arm. Press down and
hold, WITH LEFT FOOT, the second pedal from
the left: by doing this you operate the bead
breaker blade and the arm will move towards the
machine. Release the pedal: the bead breaker
blade will retract.
C.
•
Press down and hold, WITH RIGHT FOOT, the
first pedal from the right: the turntable turns
clockwise. Lift the pedal and the turntable turns
counter-clockwise.
DANGER OF LEG TRAPPING
D.
•
The lock handle enable the mount/demount tool
to be locked in the working position. Lower the
lock handle to unlock (Fig. 4.1-2) the vertical
slide, lift the handle to lock (Fig. 4.1-3).
E.
•
Turn the adjustment knob (1, Fig. Fig. 4.1-1) for
positioning mount/demount head according to rim
diameter.
For machines without Tubeles wheel system:
F.
•
Press bead seater/inflator pedal on left side of
the machine (
2
, Fig. Fig. 4.1-1): air will come from
inflation hose end only.
WHEN OPERATING THE INFLATOR IT IS
MANDATORY TO WEAR EAR PROTECTORS
AND SAFETY GLASSES TO PREVENT
CONTAMINATION FROM NOISE, DUST AND
CHIPS BLOWN BY THE AIR JETS.
