18
monty 1270 smart
Operator Manual
3
Introduction
Congratulations on purchasing the pneumatic-electric
tire changer:
This tIre changer is designed for ease of operation,
safe handling of rims, reliability and speed.
With a minimum of maintenance and care your tIre
changer will provide many years of trouble-free
operation.
Instructions on use, maintenance and operational
requirements of the machine are covered in this
manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
ANY FURTHER REFERENCE. READ THIS
MANUAL THOROUGHLY BEFORE USING THE
MACHINE.
Application.
The tire changer is intended to be used as a device
for automatically demounting, mounting and beading
car and motorcycle tIres mounted on one-piece rims
with the following specifications:
Maximun tIre diam.:
39” (1016 mm)
Maximum tIre width:
12” (305 mm)
This device must be used in the application for which
it is specifically designed.
Any other use shall be considered as improper and
thus not unreasonable.
The manufacturer shall not be considered liable
for possible damage caused by improper, wrong or
unreasonable use.
Manuals to the unit.
•
Operator’s Manual
(Chapter 1 – 9)
The operator must be familiar with it.
•
Spare Parts Manual - Service Manual (Chapter
10 and up)
Manual for use by service personnel
only.
•
Accessory Plan.
Installation instructions.
The installation instruction are in Chapter 9,
Appendices.
EC DECLARATION
(Original document contained in Spare Parts Booklet)