Hofmann megaspin 300 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 23

background image

8 - 0068

4 - CONTROLS AND COMPONENTS

4.1 - BRAKE PEDAL

This pedal allows the operator to hold the wheel when fitting the
counterweights.

It must not be actuated during the

measuring cycle.

4.2 - PNEUMATIC LOCKING PEDAL (Version P)

This pedal allows releasing the device fastening the wheel on
the adapter.

Do not actuate this pedal during the machine

cycle and/or when adapters other than the standard
cone adapter are mounted.

4.3- DISTANCE AND DIAMETER GAUGE

This gauge allows measurement of the distance of the wheel from the machine and the wheel diameter at
the point of application of the counterweight.
It also allows correct positioning of the counterweights on the inside of the rim using the specific function
(see 5.4.1) which allows reading, on the displays, the position used for the measurement (see 5.2.1.2).

4.4 - AUTOMATIC WIDTH GAUGE (OPTIONAL)

This gauge allows measuring the rim of the wheel to be balanced in the point of application of the
counterweight (see 5.2.1.1).

4.5 - AUTOMATIC WHEEL POSITIONING

At the end of the spin, the wheel is positioned according to the unbalance on the outside or else according
to the static unbalance (when selected).
Positioning is disabled automatically for wheels less than 13" in diameter.
Accuracy is ±20 degrees for wheels weighing up to 25 kg.

«
...
6
7
8
9
10
...
»

Содержание megaspin 300
























Отзывы:

Нет отзывов

Похожие инструкции для megaspin 300

Бренд: Launch Страницы: 20

Бренд: Bosch Страницы: 363

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды