Hofmann megaspin 300 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 23

background image

0068 - 5

1- GENERAL

1.1 - GENERAL SAFETY RECOMMENDATIONS

- The balancing machine should only be used by duly authorized and trained personnel.
- The balancing machine should not be used for purposes other than those described in the instruction

manual.

- Under no way should the balancing machine be modified except for those modifications made explicitly

by the manufacturer.

- Never remove the safety devices. Any work on the machine should only be carried out by duly

authorized specialist personnel.

- Do not use strong jets of compressed air for cleaning.
- Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
- Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter.
- The machine operator should not wear clothes with flapping edges. Make sure that unauthorized

personnel do not approach the balancing machine during the work cycle.

- Avoid placing counterweights or other objects in the base which could impair the correct operation

of the balancing machine.

1.1.1 - STANDARD SAFETY DEVICES

- STOP push button for stopping the wheel under emergency conditions.
- The safety guard of high impact plastic is with shape and size designed to prevent risk of

counterweights from flying out in any direction except towards the floor.

- A microswitch prevents starting the machine if the guard is not lowered and stops the wheel

whenever the guard is raised.

1.2 - FIELD OF APPLICATION

The machine is designed for balancing wheels of cars, light commercial vehicles or motorcycles weighing
less than 65 kg. It can be operated within a temperature range of -10° to +45°C.
It is provided with the following functions: Double Operator; ALU-M; SPLIT; Unbalance optimization; Self
diagnostics; Self-calibration.

1.3 - OVERALL DIMENSIONS

Fig. 1

1170

1615

1935

1255

1390

«
...
3
4
5
6
7
...
»

Содержание megaspin 300
























Отзывы:

Нет отзывов

Похожие инструкции для megaspin 300

Бренд: Atlas Страницы: 17

Бренд: Atlas Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды