Instruction manual
No. 2117-7e
2.98
2. Possibility
Set switch "Semi-Man-Auto" to "Man".
Set switch "km/h -
Σ
m" to position
Σ
m.
Position of switch
is equal.
Either
:
Set meter counter to zero position by simply switch off and on the unit.
Or
:
Keep the meter counter at the actual figure and calculate the new counter figure
by simply adding the requried line length.
Set switch "Start-Stop" to "Start".
Drive off and activate the required line length with the remote control.
3. Possibility
In case the continuous line shall start immediately after driving off, without having
marked before an interrupted line as per programme.
Set switch to
Position of switch "Semi-Man-Auto" is equal.
Set switch "Start-Stop" to "Start".
Drive off and at the desired line beginning use the remote control. For line finish
please set the switch "Start-Stop" to "Stop".
