Passenger Tire Changers Service Manual 07-13 Rev.B
53
TO REPLACE THE HANDLE WITH VALVE
Remove the pipes from the valve.
Remove the securing screw from the handle.
Push the handle downward to remove it from the arm.
Take the new handle with valve and remove the tape that hold the valve components inside of the handle.
Once removed the tape make sure to do not lose any valve component.
Slide IN the new valve with handle upward on the arm.
Place the spacer in between the handle and the arm and block it with the securing screw.
Install the pipes.
Connect the air pressure and check if the machine works fine.
Install the top cover.
6.11 AUTOMATIC TOOL CYLINDER: CHECK AND REPLACEMENT
:
30’
: 8 allen key, 19mm end key.
: Defective automatic tool cylinder may cause the following malfunction:
1.
Air leaking from the cylinder.
2.
The cylinder would not lift the tire bead.
TO CHECK THE EXTERNAL AIR LEAKING
Position the cylinder where it leaks air.
Check if the leaking is in between cylinder flange-cylinder liner or if it is coming from the piston rod.
