Hoffman CONCEPT CDSC24268LG, Инструкция по эксплуатации

Страница: 13 / 20

87568832 13 2005 Hoffman Enclosures Inc.
CONCEPT
®
Wall − Mounted Disconnect Enclosures
Installation Instructions for Cutler − Hammer C371
Flex Shaft Flexible Cable Operating Mechanisms
TABLE 1
Sub − Panel Drilling
Circuit Breaker Frame
Size
Hole Size X Y C
min
F 8 − 32 1.375 4.500 1.38
J 1/4 − 20 1.375 7.250 1.38
K 1/4 − 20 1.719 8.438 1.88
TABLE 2
Bulletin Hoffman Disconnect Enclosure Description Enclosure Depth H
CWY
CONCEPT
®
Wall Mounted Disconnect
8.00 3.85
CWY
CWSD
CONCEPT
®
Wall Mounted Disconnect
12.00 10.72
Step1 − Determine disconnect hole pattern from Figure 3 CHand the above tables. See disconnect manufacturers
instructions for range of disconnect location based on cable length being used and depth of enclosure.
NOTE − Locate disconnect so appropriate wire bend space is provided for the line side wire size being used. Refer
to National Electrical Code Article 430 − 10b for wire bend space required.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-16178-Hoffman-CDSC24268LG-CONCEPT-Steel-Disconnect-Enclosure.aspx