Hoffman CONCEPT CDSC24268LG, Инструкция по эксплуатации

Страница: 11 / 20

87568832 11 2005 Hoffman Enclosures Inc.
CONCEPT
®
Wall − Mounted Disconnect Enclosures
Installation Instructions for Square D 9422
Variable Depth Operating Mechanisms
TABLE 1
Sub − Panel Drilling
Square D Operating
Mechanism
No. Of Holes
Mtg. Hole
Position
Hole Size
H
8” Deep
H
12” Deep
J X Y
TCN, TCF 4 1,4,6,7 10 − 24 2.84 9.72 .38 5.50 4.50
TDN, TDF 4 1,4,6,7 10 − 24 2.84 9.72 .38 5.50 4.50
TEN, TEF 4 1,4,6,7 10 − 24 Do Not Install 9.72 .38 5.50 4.50
TC 4 1,2,58 10 − 24 2.66 9.53 .38 5.13 6.50
TD 4 1,2,47 10 − 24 2.84 9.72 .47 5.19 5.25
TE 4 1,2,3,4 1/4 − 20 Do Not Install 8.09 1.84 5.50 6.50
TF 4 1,2,3,4 5/16 − 18 Do Not Install 7.47 1.31 9.44 8.00
RG1 4 1,2,3,4 8 − 32 2.84 9.72 1.47 1.18 3.94
RN1 4 1,2,3,4 8 − 32 3.38 10.25 1.38 1.50 5.13
RP1 4 1,2,3,4 10 − 24 3.38 10.25 1.56 1.50 7.13
RR 1
4 1,2,3,4 1/4 − 20
D N t I t ll
9.59 .19 6.63 6.56
RR − 1
4 1,2,3,4 .375 Dia.
Do Not Install
8.22 2.50 2.00 9.25
NOTE: Square D variable depth disconnects are provided with connecting rods that must be cut to length to fit the
enclosure depth (from flange surface to subpanel surface). See table 2 and Square D instructions.
TABLE 2
Bulletin Hoffman Disconnect Enclosure Description
Enclosure Depth
C
Square “D”
D (1)
CWY CONCEPT
®
Wall Mounted Disconnect
8.00 6.88
CWY
CWSD
CONCEPT Wall Mounted Disconnect
Enclosure
12.00 10.88
1) This dimension is used to determine length to cut Square D operating rods. Use .070 for “T” dimension.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-16178-Hoffman-CDSC24268LG-CONCEPT-Steel-Disconnect-Enclosure.aspx