HOFFEN SHR-H024, Инструкция по эксплуатации

Страница: 35 / 40

[35]
6 IN 1 HAIR AND BEARD TRIMMER SET
EN
Problem Possible Cause Solution / Hint
The appliance does not
switch on.
Exhausted batteries.
Recharge the batteries
by following the
instructions described in
section “Charging”.
Trouble assembling the
cutting guides at its
places.
You are not following
the instruction related
with the assembly of
accessories.
Follow the instruction
described at section
“Operation”.
CLEANING
• Before any cleaning operation, make sure the appliance is unplugged from
the wall socket and in the on/off button (B).
• Do not immerse the main body (A) of the appliance in water or in any other
liquid.
• Wipe the main body (A) with a clean, dry and soft cloth. Do not use thinner
or benzene to clean the appliance, which may deteriorate the surfaces.
• Disassemble any accessory (H, I or J) that is being used to access the blades
D or G).
• For a proper cleaning is also convenient to detach the accessories (D, E, F
or G) form the appliance’s main body by pressing the release buttons (C) to
disengage.
• Brush the strip and its compartment with bush (K) in order to remove the
hair/hair retained, thus ensuring a good performance.
• You can also make the cleaning of the accessories (D, E, F and G) under tap
water.
• Never use hot water, not to damage the accessories.
• To clean the micro shaver (E), remove the slide coating by pressing orange
buttons on the sides, after removing the coating, clean accumulated fur/hair
with brush (K) or shake the accessories after reassemble the coating.
• After cleaning, reassemble the appliance before using it again.