HOFFEN SHR-H024, Инструкция по эксплуатации

Страница: 34 / 40

6 IN 1 HAIR AND BEARD TRIMMER SET
EN
[34]
• Before the hair cut pay attention to:
The direction of hair growth, to find any hairs that are born in the opposite
direction (spiral-formed tuft of hair);
The hollows and protuberances of the skull, often near the neck (if the
trimmer is put directly on a protruding zone, it will make a clear zone).
• Make sure the trimmer is always in the oblique position relative to the skull.
• Start cutting only a small amount of hair to get used to the length that results
from the different positions of the trimmer guides.
• For an even cut, never force the trimmer moving too fast through the hair.
• Start by using the cutting guide at the maximum length setting (i.e., leaving
the most amount of hair) before using another position.
To trim beard and moustache
• You should have a good wide-toothed comb and optionally, for the moustache
a fine-toothed comb.
• A good-sized wall mirror is usually indispensable. You might also benefit from
a magnifying mirror and possibly a three-way mirror.
• To help maintain a balance between the two sides of your face, you may find
it useful to start near the ear on one side and trim down to the chin. Then
repeat on the other side.
• To trim your moustache, first comb it straight down. Then use either the beard
trimmer or scissors. Start in the middle and trim first towards one side of the
mouth, then towards the other. Normally, you should not shave or trim the
top of the moustache. It usually looks best if you let it grow all the way up to
your nose.
• After you’ve trimmed your beard and moustache, you should maintain the
shape of your beard. Use the beard trimmer with the adjustable trimming
guide removed (be careful) to keep the neck line of your beard well-defined.
Alternatively, you could carefully shave the lower portion of your neck to
maintain the neck line of your beard.
• Miscellaneous stray hairs can be removed with a trim razor. Plucking them is
not recommended.
TROUBLESHOOTING
• During use, if any irregularities are detected on the appliance’s operation,
check the below table to understand the causes and solutions to resolve
them. If it is not possible to detect the cause, please go to the store where
the appliance was bought or contact a qualified technician.