HOFFEN SHR-H024, Инструкция по эксплуатации

Страница: 33 / 40

[33]
6 IN 1 HAIR AND BEARD TRIMMER SET
EN
Nose/ear/eyebrow trimmer (F) - nose:
• Carefully insert the trimmer on the nostril but not more than 1/4” (0.5 cm)
into nostril.
• Move the trimmer slowly and in a circular motion, gently outward and into
the nostril moving it in and out of the nostril canal.
Turn off the appliance
• At the end of the use unplug the appliance in button (B) by sliding it to
position “0” (off) and detach any accessory for cleaning the appliance.
• Brush the blades with the brush (K) to remove the accumulated hair, thus
ensuring a good performance of the appliance.
Oiling blades block
• The attachments (D, E, F and G) require lubrication monthly.
• Use only the oil provided with the appliance or light-grade oils (e.g. sewing
machine) for the lubrication of the blades. These kind of oils will not evaporate
or reduce the speed of the appliance.
• Rinse attachments (D, E, F and G) under water and dry them after.
• Use 1-2 drops of oil and spread it with a fingertip. At the end remove excess
fine of oil with a cloth.
• Do not use hair oil, grease or oil mixed with kerosene.
•
TIPS FOR HAIRCUTS AND GROOMING BEARD OR MOUSTACHE
• Until you master the use of your 6 in 1 Hair and Beard Trimmer Set, it is best
to adjust the guides for a longer hair, beard or moustache.
• Do not trim a wet hair, beard or moustache. Wet hair is longer. When it dries
you may find you’ve trimmed too much.
To Trim hair
• Use the appliance on clean and dry hair.
• Dry your hair in the direction the hairstyle you want in the end.
• Seat the person who will cut the hair so the top of its head is clearly visible.
• Place a towel around the neck and over the shoulders of the person.
• Before cutting, make sure that the hair is tangle free (with the help of a
comb).
Note:
The appliance turns off when the battery is exhausted or when disconnected in button
(B).