HOFFEN SHR-H024, Инструкция по эксплуатации

Страница: 31 / 40

[31]
6 IN 1 HAIR AND BEARD TRIMMER SET
EN
• A battery fully charged allows use for 45 minutes without having the appliance
connected to mains.
Operation
• Choose the accessory that best suits your need - see Table 1.
• Carefully attach chosen accessories (D, E, F or G) in the main body (A) of the
appliance. For doing it, align the accessory with the appliance main body (A)
and press one against the other. By placing the desired accessory you will
hear a “click” which means that the accessory is properly seated.
• The 6 mm comb (J) is to be use with the precision guide (D) while the combs
12 and 20 mm are to be used with the full size trimmer guide (G).
• To attach 12 das 20 mm combs (H or I) on blade (G) align the blade with the
teeth of accessory, slide forward and press the fixture base against the blade
to fit, which will be flagged with a “click”.
• To attach 6 mm comb (J) on blade (D) align the blade (D) with the base of
the comb and press it down.
• In each of the combs (H, I and J) the desired height for the fur/hair can be
adjusted:
To adjust the height of combs (H and I) slide the button that exists at
the bottom of the accessory - you can view the selected height in the
small window that appears on the left side of the button to adjustment
the height of the accessory.
To adjust the height of comb (J) press the fixture base while slides it
forward and backward - you can view the selected size on printed scale
on the side of precision blade (D).
• To turn the trimmer on slide on/off button (B) up to the position “I” (on).
• At the end of the use unplug the appliance in button (B) sliding it downward
to position “0” (off) and detach any accessory (D, E, F or G) before cleaning
and storing the appliance. To remove the accessory, press the release buttons
(C) and carefully pull it out.
Notes:
Never exceed the indicated charging time for the batteries.
The battery must be recharged every 6 months if it has not been used for said period
of time.