![HOFFEN MM20LD-H092 Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/hoffen/mm20ld-h092/mm20ld-h092_instruction-manual_2143960044.webp)
MICROWAVE OVEN
EN
[44]
• Often use a damp cloth to wipe the door, window (2), seals and
adjacent elements in order to remove any food and beverage residue.
Do not use abrasive detergents.
• Protect the control panel (6) against water and clean it with a damp
cloth. When cleaning the control panel (6), leave the door open in order
to prevent accidental starting of the oven.
• If steam gathers inside or outside the oven, wipe it with a soft cloth.
Condensation can occur when using the oven in high humidity areas.
This is completely normal.
• From time to time, remove the glass tray (5) and clean it. Wash the
glass tray (5) in warm water with dishwashing liquid or in a dishwasher.
• Regularly clean the roller ring (4) and the bottom of the microwave
in order to avoid excessive noise during operation. Wash the bottom
inner surface of the microwave oven with a mild detergent. The ring
can be cleaned in hot soapy water. After cleaning, place the roller ring
(4) in its original position.
• To get rid of odours inside the oven, place a deep heat-resistant bowl
inside, filled with water with lemon peel, and heat it for five minutes.
Then thoroughly wipe the inside of the oven dry with a soft cloth.
• Regularly clean the oven and remove any food residue. Excessive
dirt in the oven can cause damage to its surface, adversely affect the
operation of the appliance, or even pose a threat to the user.
9. REPAIRS
If the microwave oven does not work:
1. Make sure that it is properly connected to electrical network. If not,
remove the plug from the socket, wait ten seconds, and then plug it in
again.
2. Make sure that the fuse is not blown or that the circuit breaker has not
been activated. If not, check the socket by plugging in another device.
3. Make sure that the control panel is programmed correctly and the
clock has been set.
4. Check if the door is closed, and the safety lock has been activated.
Otherwise the current will not flow to the microwave oven.
IF THE ABOVE STEPS DO NOT SOLVE THE PROBLEM, PLEASE CONTACT
A QUALIFIED TECHNICIAN. DO NOT ADJUST OR REPAIR THE OVEN
YOURSELF.