[37]
EN
CERAMIC T
OWER HEA
TER
• Use a vacuum cleaner or a brush to remove dust from the grids. Note:
do not dismantle the grill or any part of the appliance to clean it.
• Never immerse the device in water or any other liquid.
• The engine was lubricated at the factory and does not need to be re-
lubricated.
• No other maintenance needs to be carried out by the user. If you
need any maintenance, contact the store where you purchased the
appliance.
• Store the device in a dry, ventilated place, away from sources of heat
and direct sunlight, when not in use.
•
Remember - this heater is designed to generate heat in a specific
location or as a supplementary heat generator, not to be the main
source of heat.
•
Note: the release of smoke or odor may occur during the first use,
which will pass quickly and should not happen again.
• This heater is not able to have precise control of the room temperature
and therefore cannot be used specifically for storage environments,
articles, animals and plants.
Storage
• Store the appliance in a dry and ventilated place, away from sources of
heat and direct sunlight.
REPAIRS
• This product has no user-serviceable parts. Do not attempt to repair
the appliance on your own. Always have a professional repair the
product for you.
• If the power cord is damaged, it must be replaced by the manufacturer,
their authorised technical service agent or a qualified professional.
REPAIRS
• This product has no user-serviceable parts. Do not attempt to repair
the appliance on your own. Always have a professional repair the
product for you.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a
hazard.
