EN
[36]
CERAMIC T
OWER HEA
TER
SUGGESTIONS
• Keep doors and windows of the room you want to heat closed and
make sure they are well isolated, to minimize the heating loss.
TROUBLESHOOTING
During use, if any irregularities are detected on the appliance’s operation,
check the below table to understand the causes and solutions. If it is not
possible to detect the cause, please go to the store where the appliance
was bought or contact a service center.
Problem
Possible cause
Solution
The appliance does
not switch on when
connected to the wall
socket.
The plug is not
connected correctly
into the wall socket.
Connect the plug
correctly into the wall
socket.
The wall socket is
damaged.
Connect the appliance
to a socket that works
properly.
The appliance turns
off.
The protection system
that operates in the
event of overheating
has acted by turning
the device off.
The device will switch
off automatically. Let
the appliance cool
down before using it
again.
CLEANING AND STORAGE
Cleaning
• Disconnect the device from the power supply before proceeding with
any cleaning operation and wait for it to cool completely.
• Do not use abrasive cleaning detergents or scouring pads, alcohol or
solvents.
• Light dust that may accumulate on the device can be removed with
a soft cloth. Clean the outside of the appliance occasionally with a
soft, clean and slightly damp cloth. Clean it thoroughly with a dry cloth
before using it.
