EN
[34]
CERAMIC T
OWER HEA
TER
Before operation
• Make sure that all the packing material has been properly removed
before using the appliance.
• Check that the power cable is in good condition.
Operation
• Make sure that the appliance is switched off at the operation button
(G) before connecting it to the power supply.
• Unroll the power cord completely and connect the appliance to the
power supply.
• The device is now ready for use.
• Turn on the operation button (G), pressing the button to the “I” position
and the “
“ light will come on. Press the ON/OFF button (M) on the
device or on the remote control to switch it on and the device starts to
work at high power, “HI” is shown on the display.
• To switch off the appliance, press the button (M), the display will
show 15 seconds that after elapsed, the appliance switches off
automatically.
Function setting
• Press the function button (L) repeatedly in order the device to alternate
between “high gear”, “low gear”, “ECO mode” and “high gear”.
Temperature setting
• In ECO mode, press “+” or “-“ (K) to select the desired temperature,
between 5 and 35ºC. When the room temperature exceeds the
temperature set by 2º C, the device stops operating and is in standby
mode. When the temperature is below the set temperature, the
appliance starts to heat up again.
Timing function
• Set to turn off: when the heater is turned on, press the “timer” button
(J) to choose the time you want the appliance to turn off (from 0 to 8
hours), pressing the “+” button (K) to increase and the “-” button (K)
to decrease.
• Set to turn on: when the heater is in standby mode, press the “timer”
button (J) to choose the time you want the device turns on (from 0 to
8 hours), pressing the “+” button (K) to increase and the “-” button (K)
to decrease.
