INSTALLATION
This section explains the installation procedure for the L@titude Network Module (S723).
q
Notify the monitoring center and location security that the FireNET L@titude Fire Alarm Control Panel will be
temporarily out of service.
q
Remove the module from its packaging and check its contents.
q
Connect field wiring. Refer to
below for wiring information.
q
Remove AC and battery power from the panel.
q
Connect the 40 conductor connector of the Network Module to the 40 conductor connector of the LCD Main
Processor Board.
q
Secure the Network Module to the LCD Main Processor Board with supplied hardware.
q
Restore AC and battery power.
q
Wait for the panel start-up process to complete. Refer to the
FireNET L@titude Fire Alarm Control Panel
Installation Manual (MAN-1431HA)
for more information.
q
Test communication from the panel via the
Hochiki America Corporation
FireNET L@titude Network Module (S723) Information
Guide
Version 1.05 | May 2019 | MAN-1436HA
Page 7
Installation
