Double‐click any device to see the history of
measurements it made. They are logged when the
translator is connected to a PC and EKHO
Configurator is running.
EKHO Configurator software has the “Problem
filter” feature that could useful for system
maintenance. Open it using the button on the top
of the table and select the desired time interval
(e.g. a month).
The “Problems” column will now display the
number of faults and alarms that occurred in that
time frame for each of the devices. You can sort
the table by this column so that the devices that
need to be inspected and fixed during
maintenance will be at the very top of the list.
The event protocol window is located in the bottom part of the Control tab. Here you can see all events
that occur in the system. The color shows you if the event is common (white), a warning (yellow), or an
alarm (red).
