16
EN
1. Set the tilt angle of the radiant heater (
1
) before switching it on. To do this, undo the
locking screws and tighten them again after you have set the angle (
Picture B
). Use
the large hex key to do this.
Never adjust the tilt angle while the locking screws
are tightened! Do not direct the radiant heater upwards!
2. Plug the mains plug into a plug socket.
3. Flip the main switch
0 / I
on the radiant heater to position
I
.
4. Operate the device either using the control button
on the radiant heater or the
remote control (
6
):
–
Press the control button
on the radiant heater several times to switch on the
device, increase the heat level and switch the device off again. There are three
heat levels.
–
You can use the remote control to switch the device on and off again using the
button.
–
The remote control has a dedicated button for each heat level:
Level 1,
Level 2,
Level 3
Press one of the buttons.
5. Move the main switch
0 / I
to position
0
after using the device.
Cleaning and Storage
PLEASE NOTE!
■
Allow the device to cool down before cleaning it.
■
Do not use alcohol or other caustic or abrasive cleaners or rough sponges to
clean the device. These may damage the surfaces.
•
Regularly dust the device.
•
Wipe the device with a damp cloth if necessary. A mild cleaning agent may also be
used for stubborn dirt. Then allow the device to dry completely.
•
If the device is not going to be used for a prolonged period, store it in a cool and dry
place protected from dust out of the reach of children and animals.
Technical Data
Article number:
05101
Model number:
SEH01-2000R
Power supply:
Device: 220 – 240 V ~ 50 / 60 Hz
Remote control: 2 x 1.5 V batteries AAA
Power:
Heat level 1: 800 W
Heat level 2: 1200 W
Heat level 3: 2000 W
Dimensions:
Height: 230 cm, Ø of shade: 42 cm
Protection class:
I
Type of protection:
IPX4
ID of operating instructions:
Z 05101 M HO V1 0321 md
05101_Inlay_DE-EN-FR-ES-IT_A5.indb 16
05101_Inlay_DE-EN-FR-ES-IT_A5.indb 16
23.03.2021 14:29:58
23.03.2021 14:29:58
