Step 5
Attaching the Wing
Step 4
8
Landing Gear Attachment
1. Locate the included wire landing gear.
2. Slide landing gear into the allotted
slot on the bottom of the fuselage.
3. Make sure the gear is securely in the
slot by gently pulling on it after it is
attached.
4. Attach the white plastic scale covers
with the included 4 screws, as shown.
They are located in the small bag
labeled
“A.”
1. Locate the wing and wing strut
screws that are included.
2. Place the wing so that it is centered
on the top of the fuselage.
3. Use the included rubber bands to
secure the wing by attaching two
bands straight across the top of the
wing, where each end is attached to
each set of band holders, and criss-
crossing two diagonally across the
top of the wing.
4. After you are satisfi ed that the wing
is properly centered on the fuselage,
turn the plane over and complete the
wing attachment by attaching the
struts, as shown. The screws that will
be used to attach the struts are in the
small bag labeled “B.”
5. Make certain the wing is properly
attached and centered prior to each
fl ight.
9
