8
PIRO OPTIMIZE Submenu Configuration Steps:
READ DATA reads the data under current flight mode:
If the gain, stop gain, feedback factor and the compensation of torque change to tail servo is required to set
after switching into different flight mode, select this menu and press any button of +/-10 and +/-1 to read the
data under the flight mode.
Power On
：
：
：
：
Once power on, LCD will display HELLO. After 5 seconds, configuration card will display
Turnigy® V-Bar 600 settings and is ready for use.
Default Setting
：
：
：
：
When HELLO is display, press
＋
10 and
－
1 buttons simultaneously. Configuration will
return to default value.
System Reset
：
：
：
：
Reset button is located at the bottom of LCD configuration card.
Return to the previous menu:
Press FUNC+ or FUNC- buttons, select “return” menu when Scroll up/down
function menu. Press any button of +10 ,-10,+1,-1, return to the
previous menu.
Button Description:
Total 7 function keys: FUNC+, FUNC-, +10, -10, +1, -1, Reset
Description
Function
FUNC
＋、
FUNC
－
Scroll up/down function menu
＋
10
、－
10
Increase (+) or decrease (-) value by 10 units each time.
Automatically change to 1 units if the maximum function value is less than 20.
Enter for main menu and “RETURN”
＋
1
、－
1
Increase (+) or decrease (-) value by 1 unit each time.
Enter for main menu and “RETURN”
Reset
System reset
TAIL BASE PARAM Su
bmenu Configuration Steps
：
：
：
：
1
、
、
、
、
TAIL-SRV ---- rudder servo type selection
Menu Items
Description
3: RETURN
1: PIRO-THR
2: PIRO-OPT