6
Section 2 – aileron servo & control horn installation
Required Parts
2 ServoCoverPlate
（
Right & Left
）
4 ServoFixationBlock
（
Right & Left
）
8 T2*8mmSelf-tappingScrewWith ShoulderWasher
（
Right & Left
）
2 BlackEpoxy RockerArm
（
Right & Left
）
2 BlackEpoxy Hornand pedestal
（
Right& Left
）
2 F 2*60mm Pushrod(aileron)
（
Right & Left
）
4 BoltThroughBall
（
Right & Left
）
4 M2*10mmSocket Head Cap Screw
（
Right & Left
）
4 M2 Lock nu
（
Right & Left
）
2 Servowith hardware
(Needto buy)
Tools and Adhesives
Hobbyknife
Phillipsscrewdriver
Drilland drillbits 1.5mm
ThinCA
Sockethead screw wrench1.5mm
□□
step 1
Locate the following items included in the hardware pack and the servo.
□□
step 2
Test the best position of the servo wood block, and glue it on the plywood as per picture showed.
□□
step 3
Pre-install the rock-arm and the servo with theT2*8mm self-tapping screw as per picture.
Right and left are the same
