10. Built-in devices
150
To operate
Start / stand-by screen
A few seconds after the control
panel has been connected to the
power supply, a start screen will
appear.
If nothing is entered for several
minutes, a stand-by screen will
automatically be displayed.
When the time is set (see “Setting the time”) the display alter
-
nates between the time and the room temperature that has
been set. If no time has been set, the set room temperature
will be displayed permanently.
Functions
The functions in the menu lines
l
and
m
of the control panel
can be selected in any sequence. The operating parameters are
shown in the status line
k
or in the display
n
and
o
.Functions
may vary, depending on the equipped fittings and model.
Adjusting knob / pushbutton
The adjusting knob / pushbutton
q
is used to select and chan
-
ge specified values and parameters. The changes are saved by
briefly pressing the button. Selected menu items blink.
Turn to the right (+)
-
Goes through the menu list from left to right.
- Increases the values.
Ì ≠ªΩ
ı ı
Ì ≠ªΩ
ı ı
Turn to the left (-)
-
Goes through the menu list from right to left.
- Decreases the values.
Press the button briefly
-
Saves a selected value.
- Selects a menu item; changes to the setting mode.
Press (3 seconds)
-
Main function ON / OFF
„
Reset“ button
Press the
„
reset“ button
r
to return to the previous menu
and reject the settings. This means that the previous values will
continue to apply.
