6. Interior Structure 53
To convert beds
• Distribute the crossbeams
j
evenly between the two bed
frames to provide optimal support for the slatted frames
k
.
• Then place the two slatted frames
k
on the crossbeams,
taking care to ensure that the slanted side of the bed faces
the front of the vehicle and the cushioning on the frame
faces the centre of the vehicle.
Position of the crossbeams, slatted frames and
extension board
l
2
1
3
• Place the extension board
l
between the two slatted
frames.
There is a bar on the back of the extension board to ensure
that the board does not slip. Place it against the step so
that it lies in the direction of the front of the vehicle.
Positioning the extension board
3
