manualshive.com logo in svg

Hobby 350 TB De Luxe, Руководство по эксплуатации

Поделиться
Скачать
Hobby 350 TB De Luxe Скачать руководство пользователя страница 88

09-1

9. Gas system

9.1 General safety rules for the use of liquid gas
      facilities

Inspection of the gas facilities

•

  Have the gas facilities checked by an expert 

before the first use.

•

  The gas facilities should be inspected by 

an expert every two years. This inspection 
should be documented on the inspection cer

-

tificate in accordance with the German Asso

-

ciation of Gas and Water Experts, worksheet 
G 607, and EN 1949.

•

  Regulator knobs, hoses and waste gas out

-

lets should also be inspected.

•

  We recommend that you replace the safety 

regulator knob and hose pipes fter 10 years at 
the latest.

•

  The owner/operator is responsible for arran-

ging the inspection. This also applies for ve

-

hicles that are not licensed to drive on public 
roads.

Installations and modifications

•

  Installations and modifications may only be 

conducted by an expert.

•

  Only devices with a uniform inlet pressure of 

30 mbar may be operated. 

•  Any change in the gas facilities requires a new 

inspection by an expert and written documen

-

tation of this inspection.

Regulator knobs and valves

•

  Only use those regulator knobs custom-made 

for vehicles, with a safety valve. Other regula

-

tor knobs are not permissible in accordance 
with the German Association of Gas and Wa

-

ter Experts, worksheet G 607, and EN 1949. 
They are not sufficient to tolerate the im-

  mense strain.

The gas operation pressure is
30 mbar.

Connections on gas pressure regu

-

lators are screwed on counterclock

-

wise.

Содержание 350 TB De Luxe




















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды