Hobby 350 TB De Luxe Скачать руководство пользователя страница 113

Страница: 113 / 147

10-20

10.10 Oven

• The ventilation openings on the

oven must never be closed.

• Only operate the oven when it has

been connected to the 230 V mains
(automatic ignition).

• A skylight or window must be

opened when operating the oven.

• The oven door must remain open

while igniting the oven.

• If it has not ignited, repeat this pro

cedure from step 1.

• Should the flame on the burner ac

cidentally be extinguished, turn the
switch back to the neutral position
and leave the burner off for at least
one minute before igniting it again.

10.9 Fume hood

As an option, the kitchen can be fitted with a
fume hood. The built-in fan blows kitchen odours
directly outside.

Clean the filter of the fume hood regu

larly, as it collects the fat from kitchen
odours.

The Prestige models have been
outfitted with the Dometic fume hood
CK155. Please refer to the separate
operating instructions.

Fume hood in the Prestige models

The kitchen light, which is operated via the con

trol panel, can also be switched on using the left
button.

Press the right button to turn on the fume hood.
Hold the fan button firmly to select the speed of
the fan from among 15 different speeds.

Содержание 350 TB De Luxe




















































































































































Результаты поиска

Содержание 350 TB De Luxe

Отзывы:

Бренды по названию

Популярные бренды

Hobby 350 TB De Luxe, Руководство по эксплуатации

Результаты поиска

Содержание 350 TB De Luxe

Отзывы:

Бренды по названию

Популярные бренды