Hobby 350 TB De Luxe Скачать руководство пользователя страница 129

Страница: 129 / 147

12-12

Wash the vehicle only in special
places provided for this purpose.

Use cleaning materials sparingly.
Aggressive cleansers, such as wheel
rim cleaners, damage the environment.

The following applies for tanks and con-
tainers:

• Clean, disinfect, descale and completely em

pty all water pipes and faucets. Leave faucets
open.

• Clean the fresh water tank and empty it by

unscrewing the overflow pipe.

• Clean and empty the waste water tank.
• Clean and empty the toilet flushing tank and

the excrement tank. Clean the toilet valve,
apply a lubricant for seals and leave it open.

• Completely empty the therme/boiler.
• If your camper is equipped with a hot-water

heater: rinse the water heater thoroughly and
empty all of the water.

The following applies for the external structure:

• Wash the camper thoroughly.
• Check the vehicle for damages to the varnish

and other damages. If necessary, repair these
damages and carry out any other necessary
repairs.

• The exterior should be treated with wax or a

special polish for varnish.

• Use a protective agent to protect the metal

parts of the chassis against rust.

• Check the undercarriage for damage and, if

necessary, repair it.

• Use a special cleaner for cleaning the plexig

lass windows, because normal window clea

ner makes the material cracked and brittle.

• Rub an acid-free rubber cleaning agent onto

the seals around windows, doors and service
flaps to keep them supple.

• Ensure that no water can get into the venting

on the floor, heating system and refrigerator
venting (mount winter covers).

Содержание 350 TB De Luxe




















































































































































Результаты поиска

Содержание 350 TB De Luxe

Отзывы:

Бренды по названию

Популярные бренды

Hobby 350 TB De Luxe, Руководство по эксплуатации

Результаты поиска

Содержание 350 TB De Luxe

Отзывы:

Бренды по названию

Популярные бренды