background image

15

Simplicity, realism, state-of-the-art radio technology...they all come together in Flyzone’s Cessna 182 Skylane. Fully assembled and equipped — only 
4 “AA” batteries are required — the Cessna is just minutes away from the first takeoff. An ABS cowl and wheel pants and factory-applied decals top 
off its scale-like looks. Thanks to a powerful, 380-size motor and 4-channel control, it even flies like a full-size plane! The included Tactic™ 2.4GHz 
radio system offers today’s best in safe, dependable operation. The signal constantly switches frequencies to make interference virtually impossible. 
Secure Link Technology™ ensures that your receiver will respond only to your transmitter’s signals. Also included are a preinstalled Tactic 2.4GHz 
receiver; electronic speed control with auto cut-off and 3 micro servos; 1100mAh ElectriFly™ NiMH battery pack; and 12V DC charger.  

HCAA2505

Cessna 182, Skylane, emblems, logos, and body designs are trademarks of Textron Innovations Inc. and are used under license by Hobbico, Inc."

Day or night, in any weather, you can enjoy first-class heli flying indoors with the fully assembled, nano-sized Novus CX. Though it weighs a feather-
light 1.85 ounces, the Novus CX delivers full, 4-channel control — and features durable plastic, counter-rotating main blades for exceptionally stable 
hovering and easy forwards and backwards flight. Ball bearings in the swash plate and main shaft produce smooth, efficient performance. In addition 
to the model, this RTF package comes with a 2.4GHz radio system (featuring a convenient digital servo/gyro/ESC module) plus 400mAh LiPo battery 
and wall charger. Only 8 “AA” batteries are required.  

HMXE0803

Wingspan:

 35 in (890 mm)

Length:

 27.5 in (700 mm)

Requires:

 4 “AA” batteries

Rotor Diameter:

 6.9 in (175 mm)

Weight:

 1.85 oz (52.6 g)

Height:

 5.1 in (130 mm)

Length:

 8 in (205 mm)

Width:

 1.6 in (40 mm)

A Flyzone favorite — now with 2.4GHz control!

Full-featured heli fits in the 
palm of your hand!

2.4GHz RTF

2.4GHz RTF

®

Содержание NexSTAR mini EP RxR

















Отзывы: