Hobbico Midi EDGE 540 FLWA4001, Инструкция по сборке и эксплуатации

Страница: 8 / 16

8
Remove the covering film along the mark. Then glue the lever
to the elevator flap, using epoxy glue. If glue is dry, finish the
linkage and lock the screws with blue locking agent.
The tail plane is ready now.
LANDING GEAR ASSEMBLY
Look for all parts which belong to the landing gear!
Mount the levers for flaps and rudder, using the attached
screws, which were drilled through the wood into the opposite
plate on the other side of the flap. Additional you can lock the
levers, using CA or epoxy glue.
Feel out the servo frame for elevator servo and open with
hobby knife carefully. Mount the servo with screws, the servo
lever is pointing up.
Find the correct position of the rudder lever and mark it with a
fine and non permanent marker.
ENGLISH