Hobart ecomax, Руководство по эксплуатации и обслуживанию

Страница: 15 / 26

15 - 15 -
COOKING PARAMETERS
6.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
A
B
Display 1
Display 2
Display 3
Display 4 E
D
C
Fig.1
F
6.2 CORE PROBE AND DELTA T
The probe detects the internal temperature of a product during cooking.
The cooking time cannot be set or calculated while using the probe. The
cooking cycle ends when the temperature of the product reaches the one
set for the probe.
There are three ways to manage the oven temperature while using the
core probe mode.
A - CORE PROBE (SINGLEPOINT, MULTIPOINT, VACUUM)
1. Insert the pointed end of the probe in the product (on the tray inside the
cooking chamber) until it is located in the centre of the product.
2. Close the oven door, press "ENTER" (Fig 1/A) and MENU (Fig 1/F).
Use the"MINUS" and "PLUS" keys (Fig 1/B) to select the CORE PROBE
function. Press ENTER to confirm.
3. Use the"MINUS" and "PLUS" keys (Fig 1/B) to select the CORE PRO-
BE function.
4. Select the cooking mode (Fig. 1/C), temperature (Fig. 1/D), probe tem-
perature (Figure 1/E) and the desired parameters (see chap. 5).
Press “ENTER” (Fig 1/A) to start the cooking cycle.
The cord temperature can be set up to 99° C
Example: Display 1 shows "CONV. - CORE PROBE
Display 4 shows “I 90”
To exit and return to the main menu press “MENU” button (Figure 1/F).
B - DELTA T
You can set only delta T with the inner core probe
Repeat the procedure described above in points 1 and 2.
3. Use the"MINUS" and "PLUS" keys (Fig 1/B) to select the DELTA T function.
Press "TEMPERATURE" (Fig 1/D) and set the constant temperature difference between the cooking
chamber and core probe between 20° and 120°.
Press "TEMPERATURE" to confirm. Select the desired parameters (see section 5).
Press "TIME" (Fig 1/E) and use "MINUS", "PLUS" or "SCROLL" (Fig 1/B) to set the temperature of the
core probe.
Press “ENTER” (Fig 1/A) to start the cooking cycle.
Example:
Display 1 shows "CONV. - DELTA T”
Display 3 shows “60”
Display 4 shows “I 50”
To exit and return to the main menu press “MENU” button (Figure 1/F).
The core probe function and delta T can be set in all cooking mode and/or recipe phases