Hobart ecomax, Руководство по эксплуатации и обслуживанию

Страница: 14 / 26

14 - 14 -
COOKING PARAMETERS
6.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
A
B
Display 1
Display 2
Display 3
Display 4 E
D
Fig.1
C
F G
6.1 CONVECTION (RISING)- STEAM - COMBI
CONVECTION: Cooking without ventilation (static) and with ventilation. De-
fault function.
STEAM: delicate cooking, defrosting and heating products.
COMBI: mixed cooking, with convection and humidity.
Press the "ENTER" button (Fig. 1/A) and select the desired cooking mode
(Fig. 1/C-1 Display 1).
Set the temperature (see 5.2 SETTING THE TEMPERATURE).
Set the time (see 5.3 SETTING THE TIME).
When cooking without setting a time the oven can be stopped
manually by the operation.
In the "CONVECTION" mode only, you can set the "VENT" (see
SETTING THE VENT Setting the fan speed (see 5.5 Setting the
fan speed)
Set the fan speed (see 5.6 Setting the fan speed).
Press for 3 seconds the "TIME” button (Figure 1/E) to set up the
core probe (see 3.1 and 6.2/A -point 4).
Press "ENTER" (Fig 1/A) to start cooking.
On Display 4 the time starts to count down (set time mode) or increase (in-
finity time mode).
During the "COOKING" function it is possible to switch from one mode to another (CON-
VECTION, STEAM, COMBI) and change all parameters (time, temperature, fan, vent - 5)
To start the "PREHEATING" function see 5.7
To exit and return to the main menu press “MENU” button (Figure 1/G).
PROVING
For bread and pastry making.
The "PROVING" mode function can only be set in "CONVECTION" mode.
Press the ENTER and the FAN key (Fig 1/F) and use the "MINUS" key to choose the parameter
"ZERO"(Fig 1 - Display 2).
Press "FAN" to confirm.
Press "TEMPERATURE" (Fig 1/D) anduse the "MINUS", "PLUS" or "SCROLL" to set the temperature
from 25° to 40°.
Press "TEMPERATURE" to confirm.
Press the "TIME" key (Fig 1/E - Display 4) and use the "MINUS", "PLUS" or "SCROLL" keys (Fig 1/B)set
the time from infinity, 1 minute and 09:00 hours/minutes.
Press "ENTER" to confirm the function.
Before proceeding read carefully section 3 "Operating Features"