Hobart Ecomax 502L, Инструкция по установке и эксплуатации

Страница: 15 / 23

15
ATTENTION:
The machine has to be switched off.
–
Open the door.
If the door will be closed or if no button is pressed for 30 seconds,the
indicator automatically switches off and the new settings will be saved.
Therefore the setting procedure can be interrupted at any time.
7.1. ADJUSTMENT OF DETERGENT DOSAGE
QUANTITY
Only with built in detergent pump.
– Push Program buttons
➁
simultaneously.
• LEDs light up.
• In the left display the bottom LED (1) is illuminated.
• The right display indicates the adjusted value of the detergent
dosage time: One LED corresponds to approx. 3.5 s ≈ 1 g/l
– Pre-adjusted value: “11−13” = 10.5 s ≈ 3 g/l.
– To adjust the detergent dosage time, push Program button “2”
repeatedly, until the desired value (0−35 s ≈ 0−10 g/l) is indicated.
Adjustment should be done in accordance with chemical suppliers
recommendations.
7.2. ADJUSTMENT OF RINSE AID DOSAGE QUAN-
TITY
– Push Program button “1”.
• In display
➇ LEDs 1 and 2 illuminate.
• the right display indicates the adjusted value of the rinse aid
dosage time: One LED corresponds to approx. 2.5 s ≈ 0,1 g/l.
– Pre-adjusted value: “11−13” = 7.5 s ≈ 0,3 g/l.
– To adjust the rinse aid dosage time, push Program button “2”
repeatedly, until the desired value (0−25 s ≈ 0−1.0 g/l) is indicated
Adjustment should be done in accordance with chemical suppliers
recommendations.
7. SETTINGS