Hobart Ecomax 502L Скачать руководство пользователя страница 14

14

6. 

SWITCH-OFF AND CLEANING THE MACHINE

6.1.  SWITCH-OFF

 

Versions with overflow pipe: remove

 

Close the door. 

 

Push and hold (min. 3 seconds) the Drain button 

➂ 

•  LED lights up.

The self-cleaning cycle will be started and the machine interior is 

cleaned automatically. 
NOTE: A final inspection is  recommended to remove any food 

debris.

•  Machines with optional drain pump will drain the tank automati-

cally.

•  At the end of program, the machine switches off automatically. 

 

Switch off main switch or unplug. Close the shut-off valve.

6.2.  CLEANING (DAILY)

 

Attention:  

To clean the machine do not use any chloric, acidic or abrasive 

products and no metallic brushs.

 

Open door, take out strainer and overflow pipe.

Please ensure that food debris does not enter pump intake.

 

Clean interior of the machine.

 

Put strainer and overflow pipe back into place.

6.3.  CLEANING (WEEKLY)

 

Loosen the retaining screws (A) by turning them counter-clockwise.

 

Take out and clean wash and rinse arms. 

 

Put all components back into place.

Содержание Ecomax 502L
























Отзывы: