Hobart Ecomax 502L, Инструкция по установке и эксплуатации

Страница: 11 / 23

11
4.4. SOFTENER (OPTIONAL)
NOTE: For the first run, the softener has to be filled with regenera-
tion salt and potable water.
Attention:
Filling the salt reservoir with cleaning agent will damage the
water softener.
– Open the door.
– Unscrew the softener lid and fill the softener with 1.5 kg of “Granu-
lar regeneration salt” (do not use salt tablets).
–
Fill up the softener with potable water (only at the first run). Clean
seal and rim of softener lid carefully, before closing the lid.
– Close lid and tighten.
– In order to prevent corrosion it is necessary to remove any salt
residues from tank bottom.
– Adjust the water hardness according to section 7.3.
When the Salt indicator ➅ flashes during operation, the softener
has to be refilled with regeneration salt.
There will be a slight delay before salt light goes out after refill.
4. START-UP