5 Optional modules
Operating manual mzr-11557 Ex
18
Technical data subject to change without prior notice!
Last update: March 2019
5
Optional modules
The spectrum of applications of the high performance micro annular gear
pump series may be expanded by using different additional modules. The
modules allow for special applications, which could otherwise not be
accomplished with a standard pump version. The modules may be combined
with each other and with almost all available pump heads and motor versions.
−
Heating module
enables to regulate the temperature of the fluid-containing
parts of the pump
−
+p variant allows:
a system pressure of 200 bar (on the input side inlet
pr differential pressure)
The configuration of a given pump version should in each case be discussed
with consideration to the specific requirements of the application.
Additional
customized modules may be designed on demand.
5.1
Fluidic heating- and cooling module
The fluidic heating and cooling module permits active heating or cooling of the
pump head in the operating temperature range from -20 °C (-4 °F) to a
maximum of 60 °C (124 °F). The module consists of a double casing covering
the pump head and a thermoelectric couple type L, whose mode of integration
varies depending on the pump size.
Oil, water, superheated steam or adapted
cooling liquids may be used as thermal liquids. If you are not sure, which heat
transfer liquid is the best adapted in your case, HNP Mikrosysteme will help you
find the suitable one. The thermal liquid ports for the heat transfer liquid are
2 x G1/8". The inlet for the heat transfer liquid is situated at the back and the
outlet is in the front (see figure 6).
