MADE IN GERMANY
www.hne.ag
HiPRESS 2
HNE-extinguishers have to be inspected regularly for function
and readiness by qualified personnel, but at least every 12
months according to the following inspection scope:
•
General condition and cleanliness
•
Legibility, completeness and correctness of the labelling
•
Fittings, hoses and attachment parts
•
Damage to protective coating and possible corrosion
•
Plastic parts of jet gun and backpack for cracks or deformation
•
Smooth operation of all moving parts and switches
•
Age of Filling: change at the latest after 12 months
•
Condition of internal coating: check with inspection lamp
•
Condition of seal rings in filler neck and at pressure reducer
•
Tightness of tension belts (when equipped with backpack)
Check and clean the extinguisher thoroughly after every
use, even if it has not been applied.
Check the fully operational condition. If necessary,
restore it by repair within the limits of your legitimation.
All spare parts must be approved for use with the device.
To gain full performance, extinguishing media in the
container must not be older than 12 months. Do not use
any leftover extinguishing agent again.
After maintenance or repair, the extinguisher should be
labeled with filling date and content.
NOTE: As a highly safety-relevant element, the pressure
reducer (filling adapter) is absolutely maintenance-free.
Any work at it is solely reserved for HNE. Unauthorized
action leads to the complete loss of warranty.
Service and maintenance
