MADE IN GERMANY
www.hne.ag
HiPRESS 2
The container requires 1.5 liters of total filling volume. For user
training, you can use pure water. The amount of additive for foam
generation depends on the used extinguishing agent. Approved
foam agents and their dosage are listed on the label of the
container and must be strictly observed.
Closing the container:
Filling of the liquids:
apply
silicone
grease
2
H
2
O
First, fill the exact
amount of water
into the container...
1
Put the head piece back into the vessel
and screw it tightly.
... then add the foam
concentrate. The liquids
are self-mixing, stirring
is unnecessary.
NOTE:
A thin layer of silicon grease on thread and sealing
surface prevents corrosion and facilitates opening.
Tightening the container by hand is
sufficient. Do not use tools.
Check the filter holes at the end of the riser
pipe. Remove dirt.
●
●
●
Be sure that the container is completely empty and clean
before filling.
filter holes
riser
pipe
