MADE IN GERMANY
www.hne.ag
HiPRESS 2
Charging the working pressure :
The outlet of the filling adapter is now
leading charging pressure (18 bar) for
the extinguisher.
The inlet pressure depends on the filling
level of the air cylinder and is displayed
on the gauge of the pressure reducer.
Open the outlet by turning the stop cock 90° left.
Air is flowing into the container, until the working
pressure is reached. The device is full as soon as no
more air flow is heard.
Check the gauge at the device. The
pointer should be at the beginning of the
green scale range. You can close and
uncouple the filling adapter now.
stop cock:
transversely
lengthways
= closed
= open
The extinguisher is now ready again !
Be sure, the stop cock of the low-pressure outlet is in closed
position (transversely to the hose). Open the valve of the
compressed air cylinder slowly and completely.
Lock the trigger of the jet
gun with the red safety catch
against accidental actuation.
Unlock the safety catch not
before the next use of the
extinguisher.
