HMW LoLog 450 Series, Основное руководство пользователя

Страница: 10 / 45

9

A note about Logger Identity Selection Method:-
A logger is identified with a single 7 digit reference ID.
If you select
Single Identity from the menu then you can
use the full 7 digits how you like.
E.g. account no, customer number, etc.
However, when installing a larger fleet of loggers, Radwin allows you to group
individual logger
Locations into larger Zones . This allows for geographic regions
( Zones) to be easily indexed where large fleets are involved.
So, Locations refer to loggers
Zones
contain Locations (loggers)
Many Zones may be created
Each Zone may contain many Locations (loggers)
For example, split a town up into Zones then split the Zones up into Locations and
deploy loggers within each Zone.
If you choose this (default) option you will be prompted (later on) to decide how the 7
digits are allocated. E.g. ZZ/LLLLL means you can have up to 99 zones with 99,999
loggers in each zone, or ZZZ/LLLL gives 999 zones with 9,999 loggers in each and
so on.
In this way you can develop an indexing method to allow you to quickly find sites you
wish to examine.
4. From the Logger Identity Selection Method,
choose the option as described above.
If you wish to change to location of the folder where the
database is stored, click <<Browse…>>
Then navigate to the desired folder and click <<Open>> to choose the folder.
When prompted below click <<Yes>> to confirm the folder choice.
5. Now click <<OK>> to create the database.
If you chose Zones and Locations in step 4, chose your
format for the ID number. The default is the UK postcode
format, e.g. AB12 3CD
Then click <<OK>> to continue.
Note: The Database format CANNOT be changed from this point. If you need to
change it later you will need to delete the \DATA folder and start again.
