HMS M4208, Инструкция по эксплуатации

Страница: 16 / 29

Step 4
1. Attach the console mast decorative cover(i) to console mast(j) from the top through.
2. Connect spinner wires, see picture 2. there are 4 steps, you should put the upper wire on the pothook at first, then pull back
the wire to the circular neck.
3. Connect speed wires, see picture 3.
4. S
liding the console mast(j) into console solid tube, tightening them by using 4 pcs of m8*16mm screws (6), 4 pcs of φ8*19
washer (2) and 4 pcs of φ8 spring washer(3). tighten them by l wrench(7).
5. Pushing the console mast decorative cover(i) to the bottom.
Picture 1