ASSEMBLY INSTRUCTION
Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended for two or more people to assemble this
machine to avoid possible injury.
STEP 1
(See Diagram 1)
D.)
Attach one Base Frame (#3) to the Rear Base Frame (#2). Attach an Upright Beam
(#1) onto the Base Frame and Rear Base Frame. Secure them together with two M10 x
3 5/8” Carriage Bolts (#32), one 5 ½” x 2” Bracket (#15), two Ø ¾” Washer (#41), and
two M10 Aircraft Nuts (#44) from bottom. Secure with
two M10 x 2 ¾” Carriage Bolts
(#33), two Ø ¾” Washer (#41), and two M10 Aircraft Nuts (#44) from side.
Do not
tighten the Nuts and
Bolts yet.
Repeat the same procedure to install the other side.
E.)
Securely tighten all Nuts and Bolts.
F.)
Insert two Crutches (#4) into the two Upright Beams. Insert two M18 Lock Knobs (#19)
through the selected holes to obtain desired height.
DIAGRAM 1
