HMS BE5000-i, Инструкция по эксплуатации

Страница: 27 / 56

27
BE5000-i
Computer operation
Start the computer: connect the power, press the switch on machine, put the safety key in the groove on computer,
the computer is ready. If the incline is not 0%, after pressing” i “,” incline – “or “START/STOP”, the treadmill
will automatically return to incline 0%. Then you can set incline . When running, the treadmill will enter suspended
state if you press “STOP”, the computer will keep the data, then the treadmill will continue to run if you press “START”;
If you press “STOP” twice, the data will be cleared and the treadmill will stop; If the suspended state lasts f or 5
minutes, the treadmill will enter stop state.
Manual operation: when computer is ready, press the “START” button, the time will count down 3 seconds, then
the treadmill starts, the initial speed is 1 km / h and incline is 0%. The LED will show the sp eed accordingly. Adjust
the speed and incline by pressing speed and incline buttons on computer. The speed will increase by 0.2 km / h and
incline by 1 each time.
Dot matrix display: display number of track and current position.
Preset program operation
This treadmill has
18 preset programs . P1-P5 is weight losing program. P6-P10 is Physical compliance training program.
P11-P12 is Physical training program. P13-P15 is Physical fitness maintaining program. P16-P18 is Physical recovery
program.
a. Press “PROGRAM” to enter automatic program status, the LED will show program 1, and the speed diagram. It
shows total time, and incline of this program.
b. Press “P+” and “P-” to change programs, press ENTER to enter the program you want.
c. The time window shows program preset total time. Press -/+ to change program running time (The scale is 10-
59 minutes.), press ENTER after setting.
d. Press “START” to enter program status. The time starts to count down. When changing different programs, it
will produce beep sound. When the time descends to zero, the speed slows down and the treadmill stop.
e. During program running, you can press “Speed –“or “Speed +“to change speed, and press “Incline –“or “Incline
+“to change incline.
Manual setting operation
User sets the time, distance and calorie by himself.
a. Time setting (1-60minuites): Under ready status, press MANUAL till TIME flashes, press SPEED/INCLINE -/+ to
set the time, press Enter to confirm and then set finishing, if not set ,enter into DISTANCE setting.
b. Distance setting(0.1-99km):DISTRANCE flashes, press SPEED/INCLINE -/+ to set the distance, press Enter to
confirm and then set finishing; if not set, enter into CALORIE setting.
c. CALORIE setting: CALORIE flashes, press SPEED/INCLINE -/+ to set the calorie, press Enter to confirm and then
set finishing.
d. TIME/DISTA NCE/CALORIE windows flash, press START to run. If the time, distance and calorie aren’t set, the
window will count up, otherwise, count down, after the count-down, system will stop and enter into ready state.