. Malfunction
Reason
Treatment
Cannot start the treadmill after
the power line is plugged.
1. Plug incorrectly.
2. Signal line is not
inserted correctly.
3. Safe set is not
replaced.
Plug it again.
Reset it.
3. Computer displays
normally, but the treadmill
can not be operated
4. Computer displays
normally, but the belt
doesn’t run, and buzzes.
Input voltage is too low.
Use it when voltage
is normal
Operating normally when non-
loading, the belt gets stuck
when the user is running on
the belt.
Check if the belt is too
loose.
Adjust the length of
the running belt.
TERMS OF REFERENCES
Motorized treadmill is used for legs training. Treadmill BE4000 is H class item. Unit is not intended
for therapy or rehabilitation.
TRAINING INSTRUCTION
1. Warm-Up
To prevent injury and maximize
performance we recommend that
each workout period starts with a
warm-up. We suggest you do the
following exercise as the sketch
map. Each exercise at least
about 30 seconds.
2. Position
Step on the running belt, you may put your hands
on the handle bar. Keep your back straight
during exercises. You may walk or run (look at
the pictures).
Even though we go to great efforts to ensure the
quality of each product we produce, occasional
errors and /or omissions do occur. In any event
should you find this product to has either a
defective or a missing part, Please contact us for
a replacement.
Consumer service department: ABISAL Sp. z o. o.
ul.
Ś
w. El
ż
biety 6
41–905 Bytom
[email protected]
Содержание BE4000
Страница 1: ...INSTRUKCJA UŻYTKOWANIA MANUAL INSTRUCTION NÁVOD K OBSLUZE ...
Страница 26: ......
