HMS BE4000, Инструкция по эксплуатации

Страница: 15 / 26

Operation instruction
After assembly and adjustment you can use the treadmill:
1. Turn on the electrical outlet switch, and put the emergency stop key onto the corresponding
place on the computer.
2. Stand on the side extrusions; clip the safety key to your clothing at your waist.
3. Press the “ON/OFF” key, the treadmill runs at a lower speed, you can step on the belt and walk
slowly.
4. Press the “FAST UP”, “SLOW DOWN” or “SPEED QUICK” key, the speed will change relatively,
and you can read the speed on the computer. You can run slowly for 2~3 minutes, and then run
faster if you feel comfortable. You can run freely with hand away from the handrails when you
feel well.( The fastest speed can be achieved 16KM/H)
5. You can directly see the speed, time, distance, calorie from the computer display in exercise.
6. Press “INCLINE UP”, “INCLINE DOWN” key to choose the suitable incline.
7. Slowdown when you want to finish your exercise, and run slowly for 2~3 minutes to make your
heart rate and muscle turn to normal.
8. If you can’t keep balance while running at a high speed, you can pull off the emergency stop
key, and the treadmill will stop immediately.
9. Do not step on the running belt to right or left during exercise, or else the running belt will be
aberrancy.
10. After exercise, slowdown and press “ON/OFF” key to stop the treadmill. If you want to restart
the treadmill, press “ON/OFF” key (But the interval between start and stop should be more than
1 minute).
WARNING: Continuously using incline function for more than five times, the function may not work
well. This is not the malfunction but a kind of self-protection. The function would restore in 1 hour.
ATTENTION: Reduce the possibility of shock for the console, please keep dry. To prevent liquid
poured to console, the bracket only placed seal bottles.
Computer instruction
Calorie: 0-999.9 kcal
Distance: 0-99.99 km
Time: 0-99 minutes: 59 seconds
Pulse: 60-200 times/minute
Incline: 0%~15%
Speed quick buttons: 4,6,8,10, after start-up quickly
by choice.
Program buttons: “P” circular select 6 programs and
manual operation button
Emergency key: When Emergency key falls off during operation the treadmill will stop and index
will be restarted.
On/Off: Press this button then the treadmill will start to work slowly, press again this button, the
treadmill will stop. When you want to restart treadmill, you have to wait until it stops and
then repress this button, and the treadmill will start to run from 1 km/hr; press this button
for 4 seconds, then all index in computer will be restarted.
Speed up: Press this button to increase speed 0.2 km/hr per time.
Speed down: Press this button to decrease speed 0.2 km/hr per time.
Incline up: Press this button to increase incline 1% per time.
Incline down: Press this button to decrease incline 1% per time.
Program functions
1) On standby, press program button in initial and manual state, the computer display P1,
continuous press P, the computer circular display P1,P2,…,P6 and manual, speed window
instruct the computer initial state, then press On/Off button enter running rate.
2) In the running state, press the button and enter selected process procedure.
3) In the program is running condition, can be manually adjust the speed.
4) The programs are running out, the alarm as soon as the product auto-stop, then enter standby
mode.