14
Homelift2 user guide
Version 01/2012
3.3. PLUGGING
3.3.1 Plugging/blocking the actuator cable
3.3.2 Unlocking of the actuator cable plug
Unlock with a screw-driver (as shown here), leaning in the notch. In the
same time, turn the ring from the left to the right to unlock the plug.
.
3.3.3 Anti-Pulling up cable kit.
4. USE
4.1. FIRST USE
The battery delivered with the
Homelift
2 hoist is fully charged so that you can start using the hoist
immediately. However check the hoist has been assembled properly as explained in paragraph 3, and try it
without a patient to get familiar with its use and functions.
3/ Screw the hood to the
control box with a crossed
screw-driver.
3/ Grip the notches and turn
the ring from left to the right.
The cable is locked when the
ring is turned to 90°.
1/ The 3 notches of this
ring show that the griping
device of the cable plug is
unlocked.
2/ Put the cable plug in
position and lean on it
to plunge into the
lodging.
1/ Plug the remote control
and the actuator cables
and plug the shutter.
2/ Put the anti-pulling
up hood in placing the
cables through the
opening.
