HMS Premium STR10, Инструкция по эксплуатации

Страница: 11 / 20

Step 6.
Parts: stand base assembly from step 5,
riht dimbbell platform (6), 2.75’’ screws
2pcs. (3), washers 4pcs. (11), nuts 2pcs.
(10).
Tools: Hex key 7/32’’, Wrench/Socket
9/16’’ or adjustable wrench
Secure the right dumbbell platform (6)
to right stand leg (4) using the hardware
shown in figure 6.
Note: Make sure the screws holes in
the platform are toward the center of
the stand.
Step 7
Parts: stand leg and cross brace assembly from
step 3, center plate (17), 2.5’’ screws 4 pcs. (14),
washers 8pcs. (11), nuts 4pcs. (10).
Tools: Hex key 7/32’’, Wrench/Socket 9/16’’ or
adjustable wrench
1. Install the center plate (17) to both stand
legs (4) using the hardware shown in figure
4.
Note: Make sure that center plate edges are on the outer sides of the legs and that the
logo on the plate is right side up.
2. Tighten all hardware from steps 1,2 and 3 securely.
Step 8
Parts: stand assembly from step 7, foot pegs (8)
or caster wheels (16), hold down straps (9)
Attach either food pegs (8) or caster wheels (16)
to the rear left stabilizer (2), the rear right
stabilizer (3) and both stand legs (4). See figure
8.
Attach the hold down straps (9) to the left
dumbbell platform (5) and the right dumbbell
platform (6) as shown in figure 8.
Fig. 6
Fig. 8
Fig. 7